Features:

• Simplified nearfield monitor
• Low frequencies: 5" Kevlar woofer; High frequencies: 1.5" ribbon tweeter
• Amplifier power: Low frequencies 40W, High frequencies 30W (RMS)
• Equipped with balanced XLR and balanced / unbalanced TRS inputs
• Acoustically efficient vinyl-laminated MDF enclosure

Technical Specifications:

• Type: 2-way nearfield studio monitors
• Low frequencies: 5-inch (127 mm) Kevlar cone with high-temperature voice coil and damped rubber coating. Magnetically shielded
• High frequencies: Ø 145 mm (5.5") cone / Ø 32 mm (1.5") moving coil
• Frequency response: 48 Hz - 45 kHz
• Crossover frequency: 2.8 kHz
• Amplifier power (low frequencies): 40 W
• Amplifier power (high frequencies): 30 W
• Signal-to-noise ratio: 100 dB typical A-weighted
• Input connectors: 1 x balanced XLR input connector; 1 x balanced / unbalanced TRS input connector
• Polarity: a positive signal at the + input produces an outward displacement of the LF cone
• Input impedance: 20 KΩ balanced, 10 KΩ unbalanced
• Input sensitivity: an 85 mV pink noise input produces an output SPL of 90 dBA at 1 meter with the volume control at maximum
• Protection: RF interference, output current limiting, overheating, power-on / power-off transients, subsonic filter, external mains fuse.
• Indicator: power on / off indicator on the rear panel
• Power requirements: factory programmed for 115 V ~ 50/60 Hz, 230 V ~ 50/60 Hz, or 100 V ~ 50/60 Hz
• High acoustically efficient vinyl-laminated MDF enclosure
• Dimensions (height x width x depth): 13.3" x 6.9" x 7.9" / 338 mm x 175 mm x 200 mm
• Weight: 13.2 pounds / 5.0 kg (without packaging)