Power supply: 9 V DC (regulated or unregulated): never apply more than 12 V (never use an unregulated supply greater than 9 V, as unregulated supplies usually give a higher output than shown). 9V switching power supply included. Products purchased directly from Kenton are supplied with the appropriate power supply for the delivery address. There are four types available: UK / EU / USA / Australia.

Dimensions: 140 x 87 x 45 mm

Weight: 210 g

MIDI: In, Thru (selectable)

Analog outputs: CV on 3.5 mm jack (V / oct or Hz / V)

Gate on 3.5 mm jack (Gate or S-trig)

Aux 1, 2 and 3 on 3.5 mm jacks

Sync 24 output: switchable MIDI Thru jack to operate as a Sync 24 output instead, with variable CPQN ratio

See the manual for more details.

Designed to control all types of monophonic synthesizers

Super fast response time

Famous Kenton build quality

Durable brushed aluminum enclosure La

CV output uses a high-spec 16-bit D / A converter for solid tones

Works with a standard 9-volt power supply, 2.1 mm center positive

CV / Gate / Aux outputs on 3.5 mm jack sockets (3.5 mm to 1/4″ cables are available in our cable section)

Jack

MIDI IN The MIDI THRU jack can be switched to become Sync 24

Any MIDI channel can be selected

Switchable for V / Oct and Hz / V and 1.2V / oct scaling systems La

fine tuning and the scale can be controlled using the edit buttons and the settings can be stored

Transposition (approximate tuning) - up and down 12 semitones

Adjustable pitchbend range

Programmable Gate V-trig (up to 15v) or S-trig (with or without pull-up)

Multiple and single trigger modes

Note priority selection: newest / lowest / highest

Old notes are remembered to facilitate trill effects and increase playability

Portamento: fixed speed or fixed time modes

Auto Portamento mode selectable (where legato playback activates Portamento)

Portamento controller is selectable

Three programmable variable auxiliary analog outputs, controllable by any MIDI controller

Programmable LFO - 9 waveforms inc. The

random LFO can modulate the pitch and / or Aux 1 output

Separate controllers for LFO to CV and LFO to Aux 1 The

LFO can be synced with the MIDI clock

The LFO sync point can be selected The activation of the

key can reset the

LFO auxiliary outputs can output the clock, with two individual dividers to choose from

All parameters can be controlled in real time via SysEx

32 Configurations can be stored in non-volatile memory to easily retrieve them

MIDI analyzer mode - for easy MIDI troubleshooting

Power supply included - UK / EU / USA / Australia types available

What's new or different in the Mk3?

Aux 2 and Aux 3 are now continuously variable analog outputs and are presented on 3.5 mm jack sockets

Expanded selection of controllers available for the auxiliary outputs

The auxiliary outputs now have an adjustable response speed (rise / fall time) to allow you to smooth out any controller jumps

Built-in ADSR envelope generator (whose controls can be assigned to MIDI CC)

Drum Trigger mode: the auxiliary outputs can be configured to produce a variable speed trigger pulse for drum synthesizers, each with its own dedicated trigger note

Dual clock dividers, which can be used simultaneously on different outputs, including the DIN socket when not used as a MIDI output

Variable gate output time to retrigger (multiple trigger)

32 program memories that can store and retrieve configurations

MIDI program changes can be used to retrieve configurations

Preloaded settings for many of the most popular synthesizers

Pitchbend range increased to 48 notes up and down

Flash updateable using SysEx when updates are available

32-bit ARM processor

Brushed aluminum box with black text