Focusrite RedNet HD32R is a 1U, 19-inch rack-mounted Dante interface that allows Pro Tools|HD users to directly access all the benefits of the Dante digital audio networking system, including its unique and flexible network topology and premium audio interfaces. The Pro Tools system connects to the HD32R via standard Mini DigiLink ports.

Dual Ethernet ports with locking etherCON connectors are provided, with several operating modes including daisy-chaining and redundancy confirmed by front panel indicators. Two separate power supplies with fault detection are included, with separate power input sockets (with retention clips) on the rear of the unit. The power status is indicated both remotely and on the front panel. The HD32R features a rugged, tour-ready exterior and high-quality internal construction. It also offers a compact 1U rack-mount form factor for a total of 32 I/O channels.

The HD32R acts as a 64-channel digital I/O box (32 inputs/32 outputs), which operates in the same manner as a standard interface and is compatible with a wide range of Pro Tools|HDX and HD cards. Supported Pro Tools systems include Pro Tools|HDX, Pro Tools|HD Native, Pro Tools|HD Native Thunderbolt, and Pro Tools|HD TDM. Up to six HD32R modules can be used with a Pro Tools|HDX system and three with Pro Tools|HD, allowing the maximum channel count for either. Simply connect the HD32R to Pro Tools|HD with standard Mini DigiLink connectors.

The Focusrite RedNet HD32R enables the use of the low-latency performance of Pro Tools|HD cards, bringing all the benefits of the Dante over-IP audio network and the RedNet product range to a Pro Tools|HD system. The entire range of Dante-compatible products, including RedNet's excellent analog and digital interfaces, can be used with a Pro Tools|HD system, all connected via an Ethernet cable.

From complex multi-room systems to individual installations, Dante and RedNet offer the ability to create a sophisticated and comprehensive high-quality audio production environment around a standard Ethernet network, with the HD32R as a bridge to any Pro Tools|HD system. Assign any available Dante source or destination through the HD32R and it appears in Pro Tools exactly as it would with any other Pro Tools-compatible interface, maintaining traditional Pro Tools workflows.