Features:
MIDI input (USB B / DIN)
2 x 1/4" audio outputs
1 x 1/8" 1V/oct input (mixed with keyboard input)
1 x 1/8" gate input (converted to Buchla keyboard pulse with sustain)
Optional MIDI A expansion port (USB Host).
Five additional audio connections for independent oscillator and gate inputs and outputs, plus an FM input to the modulation oscillator.
Five additional banana CV connections to control knobs and faders, and the ability to send pulses independently to different inputs.
If no auxiliary input is present, analog white noise is generated (using the 266 circuit).
A more logical top row layout.
Power-on / control mode LED indicator.
Pulser now has a dedicated single pulse switch and mode distinction
The modulation oscillator section is now green, so each main section has its own color.
The listed oscillator frequencies are more accurate, and the scaled fader input range can be trimmed from the previous range to 1.2V/oct.
You can trim the inputs of the new modulation oscillator and envelope generator so that they operate at the typical input ranges you desire.
You can trim the oscillators to the volts-per-octave range you desire for both the keyboard and the attenuator inputs.
You can also reduce the gain on gate input 1 if you have an unusually hot non-Buchla input.
A single circuit board allows it to be compatible with the modular case and easier to maintain
Switches and jumpers for those who want to use the new banana inputs, the modulation oscillator inputs, and the sustain to control the sequencer stages.
Standard headers for the program card connector that allow us to develop future iProgramCard-style preset controls from within the unit.
The new connectors accommodate our plug-in MIDI interface and provide an optional stereo digital fx option (which will be available as an optional add-on in the future)
True stereo. The 208 was always a mono synthesizer, but if you connect a stereo digital fx (which will be available as an optional add-on in the future), you will get stereo outputs on the MIX OUT and headphones.
A new power connector for greater cable length and flexibility, and the ability to remove the case, and one that is already compatible with the latest revisions of the Easel power board.
The following cables are included:
1 x Buchla Tini cable (18" yellow)
3 x Buchla banana cable (10" orange)
2 x Buchla banana cable (20" green)
4 x banana shorting bar (blue)
